Mitchell N., Lee S., Yang Y., Bauer P., Taylor T., Heller R., Yamada S., Li J., Zhou T., Devred A., Ichihara T., Song Y., Huang X., Liu C., Liu C., Ballarino A., Ding K., Lu K., Gung C.Y., Spina T., Niu E., Han Q., Ran Q., Dong Y., Du Q.
Ключевые слова: ITER, current leads, HTS, coils toroidal, coils poloidal field, central coils, operational performance, design, Bi2223, tapes, prototype
Lee S., Yang Y., Bauer P., Taylor T., Zhou T., Devred A., Song Y., Gung C., Ballarino A., Ding K., Lu K., Niu E., Fernandez A.V.
Ключевые слова: ITER, current leads, design, design parameters, fabrication, prototype, HTS, Bi2223, tapes, stacked blocks, LTS, NbTi, strands, test results
Bauer P., Wang J., Li G., Zhou T., Song Y., Huang X., Clayton N., Fang L., Wang C., Liu C., Liu C., Gung C., Ding K., Lu K., Niu E., Rol, Dai Z., Gong Z., Piccin
Ключевые слова: ITER, current leads, design, fabrication, insulation, discharge characteristics, high voltage process, measurement setup, test results
Li J., Zhou T., Song Y., Huang X., Zhang K., Liu C., Yu S., li B., Ding K., Lu K., Xu L., Han Q., Ran Q., Du Q., Jing K., Zbigniew P., Kurt S.
Ключевые слова: ITER, central coils, magnets, current leads, HTS, Bi2223/Ag alloy, tapes, fabrication, test results
Ключевые слова: ITER, coils poloidal field, current leads, prototype, test results, HTS, Bi2223/Ag alloy, tapes
Lee S., Yang Y., Bauer P., Taylor T., Zhou T., Devred A., Song Y., Huang X., Liu C., Ding K., Lu K., Feng H., Niu E., Du Q., Vergara A., Zhu S*1., Fernandez-Hernando L.
Ключевые слова: ITER, correction coils, current leads, HTS, Bi2223, prototype, fabrication, joint resistances, overheating, pulsed current, test results
Ключевые слова: measurement setup, cryogenic systems, test results, ITER, current leads, HTS, control systems, new, facility
Lee S., Yang Y., Bauer P., Taylor T., Zhou T., Devred A., Song Y., Liu C., Ding K., Lu K., Niu E., Ran Q.
Ключевые слова: HTS, Bi2223, tapes, current leads, ITER, fabrication, test results, prototype, LTS, NbTi, cable-in-conduit conductor, joints, solder, heat exchanger
Ключевые слова: HTS, Bi2223/Ag alloy, tapes, stacked blocks, joints, current leads, design, design parameters, fabrication, heat exchanger, insulation, hybrid systems, magnets, temperature distribution
Ключевые слова: ITER, current leads, prototype, fabrication, design, design parameters, pressure drop, HTS, Bi2223, stacked blocks, LTS, NbTi, cable-in-conduit conductor, joint resistances, insulation, solder, heat exchanger
Ключевые слова: ITER, current leads, HTS, design, design parameters, heat exchanger, termination, LTS, fatigue behavior, welding, joint resistances
Ключевые слова: HTS, current leads, Bi2223/Ag alloy, high field magnets, hybrid systems, fabrication, test results
Ключевые слова: HTS, current leads, test results, Bi2223, design, critical caracteristics, substrate Ni-V
Ключевые слова: HTS, current leads, Bi2223/Ag alloy, tapes, design, design parameters, overcurrent, accelerator magnets, experimental results, high field magnets
Ключевые слова: ITER, current leads, fabrication, HTS, Bi2223
Mitchell N., Bauer P., Ilyin Y., Chen Y., Zhou T., Devred A., Song Y., Sahu A.K., Lu K., Rodriguez-Mateos F., Knaster J., Dolgetta N., Nannini M., Gung C.Y., Lorriere P.
Ключевые слова: feeder, ITER, current leads, HTS, bus bar conductor, Bi2223, installation, supporting structure, quench detection, cryogenic systems
Mitchell N., Bi Y., Bauer P., Zhou T., Devred A., Song Y., Huang X., Liu C., Gung C., Ding K., Shen G., Feng H., Ni Q.
Ключевые слова: ITER, current leads, HTS, Bi2223, stacked blocks, model small-scale, critical caracteristics, critical current, joints, quench properties, voltage drops, design, test results
Mitchell N., Yang Y., Bi Y., Bauer P., Taylor T., Zhou T., Devred A., Song Y., Ballarino A., Ding K., Shen G., Foussat A.
Ключевые слова: ITER, current leads, design, HTS, Bi2223, design parameters, stacked blocks, heat exchanger
Mitchell N., Bi Y., Bauer P., Wang Z., Chen Y., Zhou T., Devred A., Song Y., Huang X., Gung C., Cheng Y., Ding K., Lu K., Shen G., Sahu A., Jong C., Dolgetta N., Ilin Y.
Ключевые слова: feeder, ITER, design, fabrication, termination, vacuum structure, cryostat
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.